Organisation for Economic Co-operation and Development

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This dataset describes the emissions to the atmosphere released as a result of production and consumption processes. The productive activities are broken down by economic activity and the household consumption activities are broken down by purpose (transport, heating, and other activities). Air emissions include emissions of individual greenhouse gases (GHG) as well as air pollutants such as sulphur dioxide, nitrogen oxides, and particulate matter. The emissions are also aggregated (using equivalence factors) to report on environmental pressures: global warming potential, acidifying gases and ozone precursors.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

This indicator reports the amount of carbon emissions from fossil fuel combustion embodied in imports and exports in mega tonnes of CO2 (MtCO2) for 63 countries and 34 industries between 1995 and 2011.

The indicator reports the hypothetical amount of carbon emissions from fossil fuel combustion embodied in imports if imported goods were produced with a carbon intensity (i.e. emissions factors) equal to that of the importing country at a given time – the Equal Carbon Intensity (ECI) assumption. It covers 65 countries and 34 industries between 1995 and 2011.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

This dataset traces net changes in terms of volume in the growing stock of standing wood on forest land. Forest depletion and growth describe balances or imbalances in different types of forests. The intensity of use of forest resources reflects various forest management methods and their sustainability. These data should be read in connection with other indicators, in particular land use changes and forest quality (species diversity, forest degradation), and be complemented with data on forest management practices and protection measures. Please bear in mind that definitions and estimation methods vary for some countries.

This dataset provides selected information on national emissions of air pollutants: man-made emissions of sulphur oxides (SOx), nitrogen oxides (NOx), particulate matter (PM), carbon monoxide (CO) and volatile organic compounds (VOC). Categories presented are based on the NFR (nomenclature for reporting) 2014 classification. 

Data is expressed in million national currency.   Environmental protection (EP) includes all activities and actions which have as their main purpose the prevention, reduction and elimination of pollution as well as any other degradation of the environment. The scope of environmental protection expenditure is defined according to the Classification of Environmental Protection Activities (CEPA 2000). CEPA distinguishes nine environmental domains.   The Environmental Protection Expenditure Account (EPEA) is a monetary description of environmental protection activities in accordance with the System of Environmental-economic Accounting (SEEA) central framework. It is coherent with the European System of Accounts (ESA 2010) which applies to national accounts and related satellite accounts. Because the full EPEA framework is quite expensive in terms of resources to be set up, this EPEA module significantly simplifies the full framework while it still allows compiling a measure of environmental protection expenditure for the whole economy comparable with national accounts aggregates.   This data focuses on the production and uses of environmental protection services. Output of these services can be output of market, non-market and ancillary activities. EPEA is directly linked to the three definitions of GDP, the production measure, the expenditure measure and the income measure of GDP.   EPEA covers (1) expenditure on EP products by resident units; (2) expenditure related to the production of EP products, including the gross capital formation, and (3) transactions related to the financing of EP expenditure. It covers both the supply and demand side. Demand equals supply: Final consumption + Gross fixed capital formation (GFCF for characteristic environmental activities) + Exports - Imports = Output - Intermediate consumption + VAT plus taxes less subsidies on products That is, the final uses of a product equal the supply of that product. The terms can be reorganised as follows: Final consumption + GFCF + Intermediate consumption = Output + Imports - Exports + VAT plus taxes less subsidies on products   The left side is the sought sum of expenditure on EP products by resident units. The right side proposes an alternative calculation approach, which indeed EPEA follows instead of the left side approach. There are several reasons for this choice, including that (a) output is simpler to measure than final consumption, intermediate consumption and capital formation (capital formation in EP products is rare; one instance is soil decontamination leading to land improvement); (b) imports and exports are small; and (c) output is also relevant by itself for analysis of production.

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

This dataset presents data on waste by economic sector, using the major divisions of the International Standard Industrial Classification (ISIC), revision 4. Data source(s): OECD/Eurostat joint questionnaire on waste. Source for non-OECD countries: UNSD, Country Files from the UNSD/UNEP data collection on environment statistics (available at: https://unstats.un.org/unsd/envstats/country_files).

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

This dataset presents the latest data on the state of threatened species, by species type.    When interpreting these data, it should be borne in mind that the number of species known does not always accurately reflect the number of species in existence and that varying definitions can limit comparability across countries.   Data source(s): OECD Annual Quality Assurance (AQA) questionnaire.

This dataset presents national-level data on water made available for use, by sector. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)