Mexiko

The focus of this domain is on enlargement countries, in other words the following country groups: candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICPs) are designed for international comparisons of consumer price inflation. HICP is used by e.g. the European Central Bank for monitoring of inflation in the Economic and Monetary Union and for the assessment of inflation convergence as required under Article 121 of the Treaty of Amsterdam.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICPs) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPIs) calculated according to a harmonised approach and a single set of definitions. In particular, HICPs provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICPs are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union, the EU and the EEA. HICPs for new Member States are chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat computes also country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. There are also interim HICPs for candidate country Turkey. It is expected that once it accedes to the EU its HICPs will be fully comparable with those of the existing Member States. For the USA, only the all-items proxy-HICP is available. The national HICPs are produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data that is released monthly on Eurostat's free dissemination database include price indices themselves as well as their rates of change as monthly, annual and 12-month moving average changes. In addition to the headline figure, the all-items HICP, around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups. An early estimate of the overall inflation rate for the euro area, as well as estimates for its four main components, are published in a news release monthly, usually on the last working day of the reference month. They are called HICP flash estimates.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

The House price index captures price changes of all residential properties purchased by households (flats, detached houses, terraced houses, etc.), both new and existing, independently of their final use and their previous owners. Only market prices are considered, self-build dwellings are therefore excluded. The land component is included. The data are expressed as annual average index 2015=100, as 3 years % change and annual average rate of change.

The house price index captures price changes of all residential properties purchased by households (flats, detached houses, terraced houses, etc.), both new and existing, independently of their final use and their previous owners. Only market prices are considered, self-build dwellings are therefore excluded. The land component is included. The data are expressed as quarterly index (2015=100), annual rate of change and quarterly rate of change.

The House Price Index (HPI) measures price changes of all residential properties purchased by households (flats, detached houses, terraced houses, etc.), both new and existing, independently of their final use and their previous owners. Only market prices are considered, self-build dwellings are therefore excluded. The land component is included.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Data in this domain constitute only a small part of the entire National Accounts data range available from Eurostat. Annual and quarterly national accounts are compiled in accordance with the European System of Accounts - ESA 2010as defined in Annex B of the Council Regulation (EU) No 549/2013 of the European Parliament and of the Council of 21 May 2013. The previous European System of Accounts, ESA95, was reviewed to bring national accounts in the European Union, in line with new economic environment, advances in methodological research and needs of users and the updated national accounts framework at the international level, the SNA 2008. The revisions are reflected in an updated Regulation of the European Parliament and of the Council on the European system of national and regional accounts in the European Union of 2010 (ESA 2010). The associated transmission programme is also updated and data transmissions in accordance with ESA 2010 are compulsory from September 2014 onwards. The annual data of this domain consists of the following collections: 1. Main GDP aggregates: main components from the output, expenditure and income side. nama_10_gdp: GDP and main components (output, expenditure and income   The quarterly data of this domain consists of the following collections 1. Main GDP aggregates, main components from the output, expenditure and income side, expenditure breakdowns by industry and assets. namq_10_ma: Main GDP aggregatesnamq_10_gdp: GDP and main components (output, expenditure and incomenamq_10_fcs: Final consumption aggregates by durabilitynamq_10_exi: Exports and imports by Member States of the EU/third countries 2. Breakdowns of GDP aggregates and employment data by main industries and asset classes. namq_10_bbr: Basic breakdowns main GDP aggregates and employment (by industry and assets)namq_10_a10: Gross value added and income by A*10 industrynamq_10_an6: Gross fixed capital formation by AN_F6 asset typenamq_10_a10_e: Employment by A*10 industry breakdowns Geographical entities covered are the European Union, the euro area, EU Member States, Candidate Countries, EFTA countries, US, Japan and possibly other countries on an ad-hoc basis. Data sources: National Statistical Institutes

The indices in this table give information on the trends in the producer prices of animal production as a whole. The sub-indices were weighted by the values of sales in 2000.

The indices in this table give information on the trends in the producer prices of crop production as a whole. The sub-indices were weighted by the values of sales in 2000.

The indices in this table give information on the trends in the producer prices of agricultural production as a whole. The sub-indices were weighted by the values of sales in 2000.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The indices in this table give information on the trends in the purchase prices of the means of agricultural production as a whole. The sub-indices were weighted by the values of purchases in 2000.

Purchasing power parities (PPPs) are indicators of price level differences across countries. PPPs tell us how many currency units a given quantity of goods and services costs in different countries. PPPs can thus be used as currency conversion rates to convert expenditures expressed in national currencies into an artificial common currency (the Purchasing Power Standard, PPS), eliminating the effect of price level differences across countries. The main use of PPPs is to convert national accounts aggregates, like the Gross Domestic Product (GDP) of different countries, into comparable volume aggregates. Applying nominal exchange rates in this process would overestimate the GDP of countries with high price levels relative to countries with low price levels. The use of PPPs ensures that the GDP of all countries is valued at a uniform price level and thus reflects only differences in the actual volume of the economy. PPPs are also applied in analyses of relative price levels across countries. For this purpose, the PPPs are divided by the current nominal exchange rate to obtain a price level index (PLI) which expresses the price level of a given country relative to another, or relative to a group of countries like the EU Member States. The production of PPPs is a multilateral exercise involving the National Statistical Institutes of the participating countries, Eurostat and the OECD. Indicators in Eurostat's dissemination database The indicators published in the price domain on Eurostat's website are the following: Purchasing power parities (PPPs) scaled to the sum of expenditures of the EU Member States expressed in euro. This means that the PPP of one particular country indicates how many units of national currency one would need in that country in order to maintain the purchasing power of one euro in the EUPrice level indices (PLIs) as defined aboveNominal expenditure in national currency, as extracted from each country's national accountsNominal expenditure as percentage of GDPNominal expenditure in euroNominal expenditure per inhabitant in euroReal expenditure, defined as nominal expenditure divided by the PPPReal expenditure per inhabitantVolume indices of real expenditure per inhabitantThe convergence indicators, defined as the coefficient of variation of the price level indices (PLIs) and per capita volume indices (VIs) of gross domestic product (GDP), actual individual consumption (AIC) and household final consumption expenditure (HFCE). It measures the price and volume convergence across countries. In addition, PPPs and real expenditures are available from the national accounts domain of the database. For further details, cf. 17.1.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Методологические пояснения: Сопоставимый уровень цен - отношение паритета покупательной способности (ППС ) к валютному курсу. Различие между ППС и валютным курсом используется в качестве критерия выявления «более дешевых» или «более дорогих» стран по сравнению с другой страной.(последняя версия - Международные сопоставления валового внутреннего продукта за 2005 год: Стат. сб./ Росстат. – M., 2008. стр.15, расчетный показатель. Комментарий: Данные предоставляются на 5-й рабочий день после публикации результатов сопоставлений ОЭСР Ведомство (субъект статистического учета): Федеральная служба государственной статистики Размещение: Информация о результатах международных сопоставлений валового внутреннего продукта, координируемых Организаций экономического сотрудничества и развития (ОЭСР) и Евростатом (за год, принятый за базу сопоставлений) Источники и способ формирования показателя: Расчет